|
Tools
We have developed tools for servicing
our flow meters, particularly the IP80 and TX80 Series. The mandrel,
part no. 26117, is useful for holding any IP or TX with its rotor removed,
while replacing a sensor. Made out of non-marring plastic, it can be
screwed to any bench. The spanner, part no. 26118, is very useful for
threading the sensor retaining screw in and out. (This job can be done
with an ordinary screwdriver, but it is more difficult.) The photo on
the right shows these tools being used.
Mandrel, Spanner |
Using the Mandrel and Spanner |
|
