Two mounting kits (MK10,
MK20) are available to provide a more modular housing system. The photos
show how a flow computer (FT415, FT420) analog transmitter (AO55) or pulse
divider (PD10) can be mounted on an IP or TX 80-Series flow sensor using
an MK10.
The MK20 (shown below) is a back half with feet, to
convert any meter mounted electronic module into a wall mount.
MK20 Mounting Kit
The housings themselves are the same rugged, fusion coated cast aluminum
enclosures used on other products. The electronic modules are physically
interchangeable.
|
